NPS 9,000 BP 2 Post Base Plate Lift

PSE 9,000 OH

9,000 LB. Overhead Lift


The PSE 9,000 OH is a 9,000 LB. an affordable, commercial grade 2 Post Lift.

This is a Two Post OVERHEAD / CLEAR FLOOR Vehicle Lift. The PSE 9,000 OHA is an Asymmetric Lift and features Symmetric Columns and Asymmetric Lifting Arms.

An Overhead Lift like this model is the design of choice for many professional mechanics because it leaves a clear floor underneath the lift. This makes moving tools such as Oil Drains, Transmission Jacks, Safety Stands and other equipment under vehicles very easy. Another feature of this Overhead Lift is a overhead safety cut off wire, that prevents damage to the tops of vehicles.

Below you will find much more information about this product, with details on all of the INCLUDED features that set this product above the rest: Details on the Power Unit & all other Featured Components; a full list of Specifications; a Photo Gallery with more pictures of this product; Shipping Information; Optional Accessories & Combo Packages available! See Below For More Info!


Product Features:
  • Carriage Cut-Off Switch: Safety cut off can be set in multiple positions to prevent vehicle damage for commonly lifted vehicles.
  • 220V Power Unit: Our powerful 220V Power Units are manufactured to strict specifications and increase speed & durability for all Pro-Series Equipment lifts!
  • Dual Point Release: The dual point safety lock release system makes operation easier for mechanics and increases service volume.
  • 2 Stage Front Arms: Two Stage Front Arms paired with Two Stage Rear Arms provide this lift excellent reach on a wide variety of vehicles.
  • Rubber Door Guards: Rubber Door Guards on each post help to prevent accidental door dings and save you money!
  • Heavy Duty Steel Carriage: The NPS 9,000 OH Carriages’ Heavy-Duty design provides strength and security, along with 10 Safety Lock positions!
  • Asymmetric Arm Configuration: This Overhead Lift comes in an Asymmetric Arm Configuration, meaning that the center of the vehicle does not need to line up with the posts on this lift. This is called a 30/70 configuration, meaning 30% of the vehicle is in front of the posts, and 70% of the vehicle is behind the posts. This helps to balance the load on the lift when dealing with unbalanced vehicles (such as 2 door coupes with a heavy engine and transmission in the front and not as much weight in the back) and also allows doors to open on cars without hitting the posts.
  • Back To Top Of Page

Product Specs for the PSE 9,000 OH
Model Number: PSE 9,000 OH
Weight Capacity: 9,000 LBS.
Design Style: Overhead
Column Configuration: Asymmetric
Lifting Arm Configuration: 2 Stage Front Arm Asymmetric
Shipping Weight: Call For Details.
Lift Height Overall: 109""
Lift Width Overall: 128"
Width Inside Columns: 109"
Max. Lift Height (Natural): 76"
Min. Lift Pad Height: 4½"
Safety Locking System: Dual Point Release
Lifting Time: 40 Seconds
Motor HP: 2 HP
Motor Voltage: 220V

Package Dimensions:
Shipping Method: Freight (LTL)
Shipping Length: Call For Details.
Shipping Height: Call For Details.
Shipping Width: Call For Details.
Shipping Weight Call For Details.
Packaging Information:

If you have any questions or would like more information on this equipment, Call 1-800-708-3126 to speak to a Pro-Series Equipment rep today.

Shipping Process:

This equipment will ship as a FREIGHT item via LTL common carrier. The customer is responsible for providing a shipping address that will be able to accept the shipment. Customers are responsible to ensure that the shipping address provided will be able to accomodate a large 18 wheel truck pulling into the drive / dock without any problems.

It is also the responsibility of the customer to unload the equipment from the truck when it is delivered. Due to the size and weight of the equipment, a forklift or wrecker boom will be required!

If the customer is unsure if the truck will be able to unload the shipment on their drive, and they do not have access to a commercial dock, it is strongly recommended that the equipment be delivered to a trucking terminal in the customer's area. The terminal staff will be able to unload the equipment from the trailer and load it onto a truck or trailer at no additional cost.

For more information on shipping policies for Pro-Series Equipment, click here.


This lift will come packaged between two steel shipping plates. The Power Unit will be banded to the lift, and all of the components, hardware and anchor bolts will be packaged inside the lift columns.

Required Tools & Materials:

You will need the following items in order to install this lift:

Concrete Rotary Hammer Drill w/ ¾" Carbide Bit, Rubber Hammer, 2 LB. Sledge Hammer, Chalk Line & Square, Socket Wrenches, Open End Wrenches, Ratchet Driver, Locking Pliers, Measuring Tape, Screwdrivers, Torque Wrench, Step Ladder, 4' Bubble Level, & 12" Adjustable Wrench.

You will also need to have 3 Gallons of AW-32 non-foaming, non-detergent Hydraulic Fluid.

Electrical Requirements:

This lift requires a 220V, Single Phase power supply on a dedicated 20 AMP circuit breaker. All electrical wiring for this lift should be done by a certified electrician!

Concrete Requirements:

The lift should be installed on a level floor with a minimum of 4" - 6" of 3,000 psi concrete (sufficiently cured). If you are unsure of the thickness of the concrete, it is best to test drill where the lift is to be installed to verify the depth of the concrete.

Installation Overview:

The instructions in the included manual should be carefully followed step by step. Our lifts are often installed by our customers, and usually will take from 4-5 hours to finish. Professional lift installation services are likely available in your area for a fee, please consult your sale representative if you are interested in learning more!

"You Can Always Count On The Pros!"

Subscribe To Our Newsletter!

Get these FREE email updates:

  • New Products
  • Special Offers
  • Expert Tips

Live Chat Support Software

1-800-708-3126     HOURS: Mon-Fri: 8am-5pm Sat: 8am-Noon | CONTACT US | DISTRIBUTOR LOGIN

Motorcycle Lifts 2 Post Lifts 4 Post Lifts Scissor Lifts
Tire Changers Wheel Balancers Tire Spreaders Brake Lathes Wheel Dollies
Sandblast Cabinets Shop Presses Oil Drains Jacks, Pumps & Rams Floor Jacks Transmission Jacks Engine Service Equipment Work Benches Salt Spreaders Snow Plows Main
About Us Contact Form Distributor Info Financing All Documentation Product Catalog Purchasing Checklist Shipping Info Warranty Info
PSE ATC 10,000 BP PSE ATC 10,000 OH PSE 10,000 BP PSE 10,000 OH PSE 12,000 BP PSE 12,000 OHP 2 Post Lift Accessories
PSE 8,000 CSP PSE 8,000 CSP XLT PSE 10,000 CSP PSE 10,000 CSP XLT PSE 12,000 FP PSE 14,000 FP PSE 14,000 FP 4 Post Lift Accessories
PSE TCPL6 Mid Rise Lift
PSE TC-150 PSE TC-260 PSE TC-370 PSE TC-470 PSE TC-570 Tire Changer Accessories
PSE WB-160 PSE WB-260 PSE WB-360 PSE WB-BWB Wheel Balancer Accessories
PSE SP-9220 PSE SP-9020 PSE SP-9120A PSE SP-9030 PSE SP-9240
Pumps Bottle Jacks Rams & Cylinders